HOW TO PRESS A DTF TRANSFER

Using A CRICUT EASYPRESS! What You Need :

ANY GARMENT

DTF TRANSFER

CRICUT EASYPRESS

How to heat press DTF transfers using Cricut Easypress

FIRST PRESS

STEP 1

Place transfer on Garment and Heat Press the transfer With these settings : 

- 320 degrees for 15-20 seconds.

COLD PEEL

STEP 2

Cold or Warm peel The PET FILM off transfer! 

2ND PRESS

STEP 3

Cover the transfer with Teflon (for shiny look) or parchment paper (for matte look)

- 320 degrees for 7-10 seconds

Your Custom Shirt is Ready to Wear

With our premium DTF transfers, create any apparel in seconds!

Note
Even heat distribution and a Good firm pressure Heat press is very important for good adhesion, avoid any zipper / pockets / seams / buttons / etc. within the press area.

Polyester/Blend Fabric:If Needed Lower the temperature to 250-300 degrees & shorten time 3-5 seconds, these types of fabrics absorb heat at a much faster rate. 

FIRST TIME?

TRY OUR FREE SAMPLE TRANSFERS

Instructions above are general guidelines. Every heat press varies in terms of Quality, temperature and pressure.

If this is your first time ordering with us, we recommend Purchasing our Sample Package with your order so that you can determine Best temperature, time and pressure for your Transfers…