HOW TO PRESS A DTF TRANSFER

Using A Heatpress! What You Need :

ANY GARMENT

DTF TRANSFER

HEAT PRESS MACHINE

How to press a DTF transfer using a heat press machine?

Place the DTF transfer on Garment

PRESSING

STEP 1

Heat Press the transfer With these settings : 

- 300 degrees for 10-15 seconds.

- Medium pressure (6-7 pressure setting)

PEEL IT

STEP 2

Cold or Warm peel The PET FILM off transfer! 

2ND PRESS

STEP 3

Cover the transfer with Teflon (for shiny look)
or parchment paper (for matte look)

- 300 degrees for 7-10 seconds

- Medium pressure. (6-7 pressure setting)

Your custom shirt or garment is ready!

Note
Even heat distribution and a Good firm pressure Heat press is very important for good adhesion, avoid any zipper / pockets / seams / buttons / etc. within the press area.

Polyester/Blend Fabric:If Needed Lower the temperature to 250-280 degrees & shorten time 3-5 seconds, these types of fabrics absorb heat at a much faster rate. 

FIRST TIME?

TRY OUR FREE SAMPLE TRANSFERS

Instructions above are general guidelines. Every heat press varies in terms of Quality, temperature and pressure.

If this is your first time ordering with us, we recommend Purchasing our Sample Package with your order so that you can determine Best temperature, time and pressure for your Transfers…

ORDER NOW